These steps will apply to most wishbone honda cars.
 
 
1. decide where you want the spring ride height to be and adjust the lower spring perch by moving the cir-clip in the groves. If you are happy w the height then leave the clip in the middle setting.
2. slide the silver color spring seat cup paying attention to which side is up.
3. install the white shock protection cup on the top of the shock tube.  
4.install the factory bump stop trimmed per the spring manufacturer suggestion, or proportionate to the drop of your springs.
5. put the spring on.
6. put the two flat washers on the shock shafy supplied with the konis.
7. exchange the koni supplied silver collar  with the oem collar in the top hat bushings.
8. install the top hat on the shock/spring assy.
9. Install the flared washer, flare up on top of the assy.
10. install one shock nut and tighten
11. install the second shock nut and tighten
12. Adjust the baseline firmness
13. install shock assemblies and fine tune the ride frimness your liking.